Low Voltage Main Distribution Products
Distribution Box With Partition
Product Overview丨
The fixed partition distribution box is a low-voltage distribution device designed based on the concept of “functional zoning and independent protection.”
By using metal/insulating partitions to physically separate functional units such as the busbar chamber, switch chamber, and cable chamber, it enhances the safety, reliability, and maintainability of the distribution system.
It is suitable for scenarios such as industrial control, commercial buildings, residential properties, and infrastructure, addressing the pain points of traditional distribution boxes including messy wiring, insufficient protection, and high maintenance risks, while providing standardized and modular distribution solutions.
Product Features:
1、This product adopts standardized modular design and can achieve Form 3b compartmentalization.
2、Each functional unit can be assembled with physical isolation as needed to eliminate the risk of arc propagation.
3、All circuits are processed with a standard 50mm modular design to achieve standardized production, greatly enhance product stability, and shorten processing cycles. Each circuit has an independent unit to reduce the risk of operational errors.
3、Quick capacity expansion and transformation can be achieved without the need for overall replacement.
4、With an intelligent modular architecture, solution expansion becomes convenient. All functional enhancements, such as touchscreen, UPS, and gateway modules, can be quickly connected through modular interface expansion.
5、Whether for distribution boxes or cabinets, the processing method is standardized, facilitating spare part preparation and shortening production cycles.
Rated current：630A
Rated insulation voltage：660V AC
Rated working voltage：380V AC
Frequency：50/60Hz
Rated impact withstand voltage：6kV
Rated short-time withstand current Icw：20kA/1s
Rated peak-tolerant current Ipk：40kA
IP rating：IP30/31/40/41
IK rating：09,10
Maximum altitude：2000m
Paint; coating：Electrostatic spraying
epoxy powder
Installation method：indoor
Plate：1.5/2.0mm
Cabinet material：Cold-rolled steel sheet
Standard modulus：50mm for 1 model
Recommended sizeRecommended Size (H*W*D)：Dimension according to the modulus matching system chart processing
Direct start：3-phase
Dual speed：5-phase
Zero ground discharge：3-phase
In and out of the line warehouse：3-phase
Positive and negative
inversion：5-phase
By using metal/insulating partitions to physically separate functional units such as the busbar chamber, switch chamber, and cable chamber, it enhances the safety, reliability, and maintainability of the distribution system.
It is suitable for scenarios such as industrial control, commercial buildings, residential properties, and infrastructure, addressing the pain points of traditional distribution boxes including messy wiring, insufficient protection, and high maintenance risks, while providing standardized and modular distribution solutions.
Product Features:
1、This product adopts standardized modular design and can achieve Form 3b compartmentalization.
2、Each functional unit can be assembled with physical isolation as needed to eliminate the risk of arc propagation.
3、All circuits are processed with a standard 50mm modular design to achieve standardized production, greatly enhance product stability, and shorten processing cycles. Each circuit has an independent unit to reduce the risk of operational errors.
3、Quick capacity expansion and transformation can be achieved without the need for overall replacement.
4、With an intelligent modular architecture, solution expansion becomes convenient. All functional enhancements, such as touchscreen, UPS, and gateway modules, can be quickly connected through modular interface expansion.
5、Whether for distribution boxes or cabinets, the processing method is standardized, facilitating spare part preparation and shortening production cycles.
Rated current：630A
Rated insulation voltage：660V AC
Rated working voltage：380V AC
Frequency：50/60Hz
Rated impact withstand voltage：6kV
Rated short-time withstand current Icw：20kA/1s
Rated peak-tolerant current Ipk：40kA
IP rating：IP30/31/40/41
IK rating：09,10
Maximum altitude：2000m
Paint; coating：Electrostatic spraying
epoxy powder
Installation method：indoor
Plate：1.5/2.0mm
Cabinet material：Cold-rolled steel sheet
Standard modulus：50mm for 1 model
Recommended sizeRecommended Size (H*W*D)：Dimension according to the modulus matching system chart processing
Direct start：3-phase
Dual speed：5-phase
Zero ground discharge：3-phase
In and out of the line warehouse：3-phase
Positive and negative
inversion：5-phase
